鍍膜前無塵工作臺（高配型）
產品簡介 Product features
1.頂腔采用2臺雙進風風機，使得出風面積更大，潔凈有效面積大大提高 2.上中腔兩側風機循環，使腔體內風速流動加快，避免循環死角，流動均勻更好 3.下腔采用多翼式葉輪，循環風速加快，風壓也更大，經過高效空氣過濾器，潔凈度更高 4.工作臺頂部安裝雙管日光燈 5.下腔門開，電機自動停止轉動，防止外部粉塵進入腔體內 1. Two double inlet air blowers are used in the top chamber, which makes the air outlet area larger and the clean and effective area greatly improved. 2. The fan circulation on both sides of the upper and middle chambers accelerates the flow of wind velocity inside the chamber, avoids looping dead angles, and makes the flow even and better. 3. The multi-wing impeller is used in the lower chamber to increase the circulating wind speed and air pressure. With a high efficiency air filter, the cleanliness is better. 4. Double fluorescent lamps installed on the top of the table 5. When the lower chamber door is opened, the motor stops automatically to prevent external dust from entering the chamber.
技術參數 Technical parameters
